Quick Keys

Programming Quick Keys

Assigning an SQK

To a conventional system:
  1. Open the Program System menu.
  2. Select the system you want to assign the Quick Key to.
  3. Select Edit Sys Option, then select Set Quick Key.
  4. Enter the Quick Key you want to use for this system.
To a trunked system:
  1. Open the Program System menu.
  2. Select the system you want to assign the Quick Key to.
  3. Select Edit Site, then select the site you want.
  4. Select Set Quick Key, then enter the Quick Key you want to use for this site.
To the Close Call Hits system :
  1. Open the Close Call menu.
  2. Select Hits with Scan, then select Set Quick Key.
  3. Enter the Quick Key you want to use for the Close Call Hits system.
To a service search range :
  1. Open the Search for... menu.
  2. Select Edit Service, then select the service search range you want to assign the Quick Key to.
  3. Select Search with Scan, then select Set Quick Key.
  4. Enter the Quick Key you want to use for this search range.
To a custom search range :
  1. Open the Search for... menu.
  2. Select Edit Custom, then select the custom search range you want to assign the Quick Key to.
  3. Select Search with Scan, then select Set Quick Key.
  4. Enter the Quick Key you want to use for this custom search range.

Assigning a GQK

  1. Open the Program System menu.
  2. Select the system containing the channel group you want to assign the Quick Key to.
  3. Select Edit Group, then select the channel group you want.
  4. Select Set Quick Key, then enter the Quick Key you want to use for this channel group.

Using Quick Keys

To use SQK 0 through 9

To use SQK 10 through 99

To use a GQK

This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT BC346XTC Users Guide