this topic

To submit a quick-tip to be incorporated into a nice printable quick reference, submit it below. Note that these should be things you do while operating (not programming) the scanner. So, quickly turning modes on or off, selecting different things, etc. Once the list is fairly populated, we'll format it into a nicely printable quick reference you can print and carry with you (or hand to a novice user so they can get going with what you've programmed).

To add to the table, you must be logged into this site. Then, click EDIT below the table. (Do not edit the page with the edit button at the top of this page.)

To do this: Press this: Submitted By
Temporarily lock out a channel. Press L/O once when on that channel. PaulOpitz
Permanently lock out a channel. Press L/O twice rapidly when on that channel. PaulOpitz
Unlock all systems, sites, groups and channels Long press on the L/O key to display the prompt “Unlock All Systems?” - press [E / yes / gps] to unlock all data. JohnNewell
Enable a system/site for scanning. Press that system/site's SQK. For system/sites that have two-digit SQKs, press [.] then the two-digit SQK. PaulOpitz
To change Display Mode: Hold --> Function button --> 6/DISP button RichCarlson
To Directly go to a channel using number tag: Hold --> (system number tag)(. / NO)(channel number tag) --> MENU RichCarlson
Hold on a single system: Press HOLD for 2 seconds while on that system. PaulOpitz
Release held system: Press HOLD for 2 seconds to resume normal scanning. RichCarlson
Quick System Select (without System Tag): Press Function key, then rotate scroll knob to desired system (for multi-site systems, this cycles through sites) RichCarlson
Quick System Select (with System Tag): Press HOLD. Then press (system tag)--> (./NO) --> MENU. PaulOpitz
To save an iCall "wildcard": Press HOLD. Type ".0" then "E", select the system to save. For iCall in HEX use "." DavidMcCormick
Set a visual (LED) channel alert: In the menu, select the channel, then select "Set Alert," then "Set Alert Light," then select color, then press [E / yes / gps] and select "On," "Slow Blink" or "Fast Blink." JohnNewell
To cancel or stop a service search FUNC+L/O, L/O while in the service search RichardVictor
To toggle between ID Scan and ID Search FUNC+SCAN RichardVictor
To unlock system FUNC+Scroll to Select System then L/O RichardVictor
To enable weather alert (Priority/operating in the background) when scanning systems: HOLD>FUNC+0 RichCarlson
To temporarily mute audio MENU (L/O or MENU to unmute) RichardVictor
To lockout a custom search FUNC+L/O while on the custom search RichardVictor

CLICK THIS EDIT BUTTON