Using Preloaded Systems

Your scanner is factory preloaded with some of the most listened-to systems in the US. If you are fortunate enough to live in an area where one of these systems can be received, then you might have something to listen to right out of the box. Note that the preloaded systems are not intended as final programming: You'll need to set the scanner up to suit what you really want to listen to. This is just intended to show that the scanner really works and gives you something to monitor while you get your own programming taken care of.

Notes:

• This page applies to the BCD396XT, BCD996XT, and BC346XT. The BCT15X uses preprogrammed state-by-state data, instead.
• System information changes all the time. The preloaded systems were accurately programmed several months prior to first production. It is possible that a system preloaded in the scanner is no longer operational with the preloaded settings.

Turning On/Off Preloaded Systems

To turn a preloaded system on or off, press SCAN, then press ./no then the two-digit System Quick Key.

Preloaded Systems

Refer to the tables below to see the systems preloaded into your scanner.

BC346XT

BCD396XT / BCD996XT