To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.Use this menu to start a search, to change the options for the three different types of searches, and program the 3 search keys.
Note: Any analog transmissions on this channel will lose the first part of the transmission, up to the wait time you set here.Select the number of milliseconds (after the start of a transmission) the scanner should wait while checking for P25 data. Choose a number from 0 through 1000 ms in 100 ms increments. The scanner only applies the wait time when Tone/Code Search in Srch/CloCall Opt is set to Off.
Auto | The scanner uses the default modulation type for this frequency. You can change the default by editing the Band Tables (BCD396XT/BC346XT Band Defaults, BCD996XT Band Defaults, BCT15X Band Defaults). |
---|---|
AM | The scanner treats the frequency as AM modulation. |
NFM | The scanner treats the frequency as Narrowband FM modulation (about 7.5 kHz deviation; also referred to as SNFM in some references). |
FM | The scanner treats the frequency as FM modulation (about 15 kHz deviation; also referred to as NFM in some references). |
WFM | The scanner treats the frequency as Wideband FM modulation (over 100 kHz deviation; used for pre-digital conversion TV broadcast reception and similar). |
FMB | The scanner treats the frequency as FM broadcast modulation (about 75 kHz deviation; used for FM radio station reception and similar). |
Note: Any analog transmissions on this channel will lose the first part of the transmission, up to the wait time you set here.Select the number of milliseconds (after the start of a transmission) the scanner should wait while checking for P25 data. Choose a number from 0 through 1000 ms in 100 ms increments. The scanner only applies the wait time when Tone/Code Search in Srch/CloCall Opt is set to Off.
This page applies to the following scanner(s): BCD996XT BCD396XT BCT15X Users Guide |