BC125AT Event Scanner
The BC125AT Event Scanner is the perfect companion when going to auto races, air shows, boat races...just about any event where two-way radios are used. The materials on this page will help you to program your
BC125AT before you leave the house.
USB Drivers
OS Other than Windows 8.x: To download USB drivers for your BC125AT, right click and save to your local PC, then unzip:
BC125AT_USB_driver.zip
Windows 8.x and later (including Windows 10): Download and unzip the following file:
Windows_Serial_Drivers.zip to a folder on your PC.
Plug the scanner into a USB port. When prompted for a driver, select the "*.inf" file appropriate to your operating system.
PC Programming Software (Updated 9/3/2015)
- Right click and save BC125AT_SS_V1_03_00.zip to your local PC.
- Unzip the files to a temporary directory.
- Double click the file "setup.exe" to install the software.
Updated 9/6/2012 to add support for switching between USA and Canada Band Plans.
Updated 9/3/2015 to add support for operation under Windows 10.
Programming Protocol
The below file is provided as-is with no warranty or additional support. It is made available without cost to persons wanting to incorporate support for the
BC125AT in their software. Uniden does not warrant the information to be complete or correct.
BC125AT_PC_Protocol_V1.01.pdf
Owner's Manual
English:
BC125ATom_07262012.pdf
French:
BC125AT_OM_French_07282012.pdf
Firmware Update Information
Click
BC125ATFirmwareUpdate for firmware updating information.
