This page applies only to the BCD396XT, BC346XT, and BC346XTC. For other models see:Hold stops the scanner on the current channel or frequency. You can access these functions by using the different key operations:
Key Name (2nd operation) Action on: |
Hold (Close call) |
1 (Search 1) |
2 (Search 2) |
3 (Search 3) |
---|---|---|---|---|
Tap | Resume scan or search. | Enter the number on the key | ||
FUNCTION + Tap | Enter Close Call mode. | Start the Quick Search assigned to this key | ||
FUNCTION + Press & hold | Enter Close Call Only mode. | NA | ||
Key Name (2nd operation) Action on: |
Scan (Search) |
4 (IF exchange) |
5 (Volume offset) |
6 (Display mode) |
Tap | Enter Scan mode. | Enter the number on the key | ||
FUNCTION + Tap | Enter Search mode. | Switch to an alternate intermediate frequency to avoid interference. | Change the volume offset for the current signal. | Rotate through the three available display modes. |
Key Name (2nd operation) Action on: |
Lockout |
7 (Attenuation) |
8 (Reverse freq.) |
9 (Modulation) |
Tap | Unlock the current channel or frequency if locked. If unlocked, single-tap to temporarily lock or double-tap to permanently lock the current channel or frequency. |
Enter the number on the key | ||
FUNCTION + Tap | Unlock the current System, Site, or Search if locked. If unloced, single-tap to temporarily lock or double-tap to permanently lock the current system, site, or search. |
Toggle the attenuator state for the current signal. | NA | Change the modulation type. |
FUNCTION + Press & hold | Unlock all systems, sites and searches. | Toggle the attenuator state for all signals. | Switch to the reverse repeater frequency of the current signal. | NA |
Key Name (2nd operation) Action on: |
Backlight (Power, Lock) |
No (Decimal, Priority) |
0 (Weather) |
Yes (Enter, GPS) |
Tap | Turn on the LCD backlight. | Enter a decimal point or "i" for direct entry. | Enter "0". | In Search Hold, save the current frequency into memory. In Scan Hold, go to menu mode for the current channel or, if held on a Trunked System frequency, go to menu mode for the system. |
Press & hold | Turn the scanner on or off. | NA | NA | NA |
FUNCTION + Tap | Lock or unlock the keypad. | Turn Priority scan on or off. | Change the weather alert priority setting. | Enter GPS mode. |
FUNCTION + Press & hold | Turn the scanner on or off. | NA | Enter Weather mode. | NA |
This page applies to the following scanner(s): BCD396XT BC346XT BC346XTC Users Guide |