Quick Keys let you enable or disable systems and channel groups while scanning. Disabled systems and channel groups are ignored during scans.
You can assign Quick Keys at the system/site level ( System/site Quick Key, or SQK), at the channel group level ( Group Quick Key, or GQK), or at both levels.
You can assign an SQK to the temporary system Close Call Hits that is created during Close Call searches. This system and its SQK operate like any other system.
You can assign Quick Keys to service searches and custom search ranges. These search Quick Keys operate like regular SQKs.
Enter the Quick Key you want to use for this custom search range.
Assigning a GQK
All channels in the channel group will be enabled (or disabled) when you enter the GQK.
Multiple channel groups in the same system can share the same GQK. However, all of these channel groups will be enabled (or disabled) when you enter the GQK from within that system.
You can assign GQKs to channel groups even if their system does not have an assigned SQK.
You can only use GQKs within the current system: the GQK will not affect a channel group in another system.
Select the system containing the channel group you want to assign the Quick Key to.
Select Edit Group, then select the channel group you want.
Select Set Quick Key, then enter the Quick Key you want to use for this channel group.
Using Quick Keys
Quick Keys only work in Scan mode.
Entering the Quick Key toggles the enabled/disabled state of the system/site/search range or channel group (i.e., if the system is currently enabled, entering the Quick Key will disable it, and vice-versa).
To use SQK 0 through 9
Enter Scan mode.
Tap the number key that matches the SQK. (For example, if the SQK is 4, just enter 4.)
Any systems, sites, or search ranges assigned to this SQK become disabled. (If they were already disabled, they become enabled.)
To use SQK 10 through 99
Enter Scan mode.
Tap the decimal point ( ./NO ), then enter the SQK. (For example, if the SQK is 32 , enter ./NO / 32.)
Any systems, sites, or search ranges assigned to this SQK become disabled. (If they were already disabled, they become enabled.)
To use a GQK
Enter Scan mode.
Go to the system that contains the channel group you want to enable or disable.
Tap FUNCTION , then tap the number key that matches the GQK. (For example, if the GQK is 7 , enter FUNCTION / 7.)
Any channel groups assigned to this GQK within the current system only become disabled. (If they were already disabled, they become enabled.)