To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.
Set Quick Key
Assign this search range to a Quick Key so you can easily enable or disable it during scanning. Enter a number from 0 to 99; tap NO (the decimal point) if you don't want to assign this search range to a Quick Key. (For more information, see
Quick Keys.)
Set Startup Key
Assign this search range to a Startup Key so you can lock or unlock it during power up. Enter a number from 0 to 9; tap NO (the decimal point) if you don't want to assign this search range to a Startup Key. (For more information, see
Startup Keys.)
Set Number Tag
Assign a number to this search range that you can use to quickly access the first frequency of the the search range. Choose a number from
0 to
999. (For more information, see
Number Tags.)
Set Lockout
Decide whether you want to lock out the search so the scanner will ignore it during Scan and Search modes. Choose one of the following options:
- Unlocked: The search range is included while scanning.
- Temporary L/O: The search range is locked out until you turn the scanner off and back on.
- Lockout: The search range is permanently locked out.
Set Hold Time
Set how long the scanner spends checking this search range before moving to the next search range or system. (2 seconds is the default). If you set the hold time to 0, the scanner will scan the entire range, regardless of how long it takes, before moving on to the next search range or system.