Single-frequency P25 systems are almost idfentical to
standard P25 systems, except they only have one site per system and the system can use a P25 network address. Here is a
conceptual layout diagram of a single-frequency P25 system (
click here for a legend of the diagram).
Programming a Single-Frequency P25 System
To program a single-frequency P25 system, you'll need to program the required elements in following order (
click here for information on using the menu):
Create a system
- Go to the Program System menu and choose New System .
- The scanner will prompt you for the System Type. Select P25 .
- When the scanner prompts you to select Standard Trunk or One-Freq Trunk select One-Freq Trunk, then tap YES .
- The scanner creates the system with a default name. Select Edit Name if you want to change it.
- If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.
System properties
(All of these options can be found under the
Program System menu. If necessary, the sub-menu and the exact option name are listed beside each property.)
Create exactly 1 site
Each single-frequency P25 system must contain exactly 1 site.
- On the Program System menu, select the system you just created.
- Go to the Edit Site menu and select New Site .
- Select the Set Frequencies menu and enter the frequencies for this site.
- If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.
Site properties
(All of these options can be found by selecting the site name under the
Edit Site menu. If necessary, the sub-menu and the exact option name are listed beside each property.)
Programming a system for Scanning
Once you create the system and site, you can
Search the system with no problems. However, if you want to
Scan the system, you'll need to program the required elements in following order (
click here for information on using the menu):
Create a channel group
Each P25 system can contain up to 20 channel groups.
- On the Program System menu, select the system you just created.
- Go to the Edit Group menu and select New Group .
- If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.
Channel group properties
(All of these options can be found by selecting the group name under the
Edit Group menu. If necessary, the sub-menu and the exact option name are listed beside each property.)
Create a channel
Each trunked system can contain up to 500 channels in each group.
- On the Edit Group menu, select the channel group you just created.
- Go to the Edit Channel menu and select New Channel .
- Input the Talk Group ID (TGID) for this channel.
- If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.
Channel properties
(All of these options can be found by selecting the channel name under the
Edit Channel menu. If necessary, the sub-menu and the exact option name are listed beside each property.)