This page applies only to the BCD996XT. For other models see:You must have a compatible GPS receiver connected!
|
|
These displays are available if you select a POI.
|
|
|
These displays show the details of each location you've set. SCROLL to go to the next location. |
Key Name (2nd operation) Action on: |
GPS |
MENU |
Yes (Enter) |
LOCKOUT |
|
---|---|---|---|---|---|
Tap | NA | Return to GPS Mode | Go to the menu mode. | Change the lockout status of the current location. | |
Press & Hold | Overwrite the selected location with the current location. | NA | NA | Unlock all locations of the current type (POI, Dangerous Road, Dangous Crossing) | |
FUNCTION + Press & Hold | NA | NA | NA | Display "Unlock All Locations?" If you press E/YES all locations of all types are unlocked. | |
Key Name (2nd operation) Action on: |
SQUELCH |
VOLUME |
SCROLL - FUNCTION |
SCAN/SEARCH |
HOLD/RESUME |
Rotate | Adjust Squelch. | Adjust volume. Turn fully counterclockwise past click to turn off scanner. | Select a location. |
NA | NA |
Tap | NA | Change backlight level. | Activate the FUNCTION mode for the next keypress. | Go to Scan Mode | Go to Scan Hold mode. |
Press & Hold | NA | NA | "Latch" the FUNCTION mode. Scanner stays on the current system and all keypresses use the FUNCTION mode until you tap the control again. | NA | NA |
Key Name (2nd operation) Action on: |
GPS |
MENU |
Yes (Enter) |
LOCKOUT |
6 / DISPLAY |
---|---|---|---|---|---|
Tap | NA | Go to the Menu mode. | Go to the review location mode. | Temporarily lockout the current location alert if it one is active. | NA |
Double Tap | NA | NA | NA | Permanently lockout the current location alert if it one is active. | NA |
Press & Hold | Store the current location. | NA | NA | NA | NA |
Function + Tap | NA | Go to the menu mode to edit the current location. | NA | Temporary lockout the current location alert if one is active. | Switch between GPS display modes. |
Key Name (2nd operation) Action on: |
SQUELCH |
VOLUME |
SCROLL - FUNCTION |
SCAN/SEARCH |
HOLD/RESUME |
Rotate | Adjust Squelch. | Adjust volume. Turn fully counterclockwise past click to turn off scanner. | Select a POI. |
NA | NA |
Tap | NA | Change backlight level. | Activate the FUNCTION mode for the next keypress. | Return to previous operation. | Hold on the current channel. |
Press & Hold | NA | NA | "Latch" the FUNCTION mode. Scanner stays on the current system and all keypresses use the FUNCTION mode until you tap the control again. | NA | Hold on the current system. If already holding on a system, resume normal scanning when in scan mode. |
Function + Rotate | NA | NA | Quickly skip to the location starting with the next alphabetic character. | Return to previous operation. | NA |
This page applies to the following scanner(s): BCD996XT Users Guide |