This page applies only to the BCT15X. For other models see:
Key Name (2nd operation) Action On |
Police/DOT/PRIORITY |
1 (Search 1) |
2 (Search 2) |
3 (Search 3) |
---|---|---|---|---|
Tap | Go to Scan Mode. | NA | ||
FUNCTION + Tap | NA | Start the search range assigned to this Search Key. | ||
Key Name (2nd operation) Action on: |
Highway Patrol / <nop>BearTracker / Alert |
4 (IF exchange) |
5 (Level offset) |
6 (Display mode) |
Tap | Go to Scan Mode. | NA | ||
FUNCTION + Tap | Go into Alert Plus mode and start scanning. | Toggle the IF for that the current frequency. | NA | NA |
Key Name (2nd operation) Action on: |
GPS / Weather |
7 (Attenuation) |
8 (Reverse freq.) |
9 (Modulation) |
Tap | Switch to the GPS Navigation display. | NA | ||
FUNCTION + Tap | Toggle the Weather Alert Priority mode. | Toggle the attenuator state. | NA | Change the modulation. |
FUNCTION + Press & hold | Start Weather Scan. | Toggle the attenuator state for all signals. | NA | NA |
Key Name (2nd operation) Action on: |
Menu |
. / No (Decimal) |
0 |
Yes (Enter) |
Tap | Enter the Menu Mode. |
Press to enter the Band Scope Setting mode and select a setting. The selected setting flashes. In Band Scope Setting mode, selects the next setting. |
NA | Set the marker frequency as the center frequency. In Band Scope Setting mode, with CF selected edit the center frequency. |
FUNCTION + Tap | Enter the Menu Mode. | NA | NA | NA |
Key Name (2nd operation) Action on: |
SQUELCH |
VOLUME |
SCAN/SEARCH |
HOLD/RESUME |
Rotate | Adjust Squelch. | Adjust volume. Turn fully counterclockwise past click to turn off scanner. | NA | NA |
Tap | Stop the alert tone and set the scanner to temporary mute alerts. Press again to cancel. | Change backlight level. | Resume scanning. | Hold on the current frequency. Press again to resume. |
Press & Hold | Permanently mute alerts. Press again to cancel. | NA | NA | NA |
FUNCTION + Tap | Toggle Close Call Modes. | Select the current state. | Switch between Max Hold Search mode and Search Mode. | Hold on the current frequency. Press again to resume. |
Key Name (2nd operation) Action on: |
LOCKOUT |
SCROLL - FUNCTION |
||
---|---|---|---|---|
Rotate | NA | Change the marker frequency one step frequency per click. In Band Scope Setting mode, change the selected parameter (except CF). |
||
Function + Rotate | NA | Change the marker frequency one "bar" per click. | ||
Tap | In Band Scope setting mode, return to the normal Band Scope mode. | Activate the FUNCTION mode for the next keypress. | ||
Function + Tap | Restart the Band Scope. | NA |
This page applies to the following scanner(s): BCT15X UsersGuide |