To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.When you create a new site, the scanner automatically assigns a default site name using the following pattern
Site XXX-YYY TTTwhere XXX is a 3-digit system index number, YYY is a sequential site number (1 through 256), and TTT is one of the following 3-letter type codes:
Auto | The scanner uses the default modulation type for this frequency's band. |
NFM | The scanner treats the frequency as a Narrowband FM band. |
FM | The scanner treats the frequency as an FM band. |
Band plan number | Select one of the 16 available band plan slots. |
Input Base Freq | Enter the lower limit of the band frequency. Valid frequencies are between 25.00000 MHz and 1300.00000 MHz at each 5.0 Hz step (25.000000 MHz, 25.000005 MHz, 25.000010 MHz, etc.). |
Input Spacing | Enter the number of kHz between each channel. Valid spacings range between 125 kHz and 128 kHz at each 125 Hz step (125.000 kHz, 125.125 kHz, 125.250 kHz, etc.) |
{band plan number} :{base frequency} / {spacing}So a band plan label of 6:534.02585/127.750 means this is band plan number 6, with a base frequency of 534.02585 MHz and 127.750 kHz between each channel.
Softer | No Change | Louder |
-3, -2, -1 | 0 (default) | +1, +2, +3 |
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT BC346XTC Users Guide |